60 FL project page 1
Some of the early parts I pulled out of the storage shed to see what I can do with them....
Had this sitting around in the storage shed for at least 40 years....
The mousetrap is in good shape and will be used....
I've had this VL springer hanging on my shop wall forever,
I had figured it was beyond repair, but am reconsidering that,
Will take it apart, sand blast it, and take a close look at what I've got here....
It's pretty rusty, thin in places, that scares me....
There's parts missing, don't know if I can find replacements or not,
Might have to machine something custom for the top piece....
One of the springer legs has been welded, will have to cut that open
and take a close look at it....
This is a long term project, it will take awhile....
Pulled this '59 drop seat frame and these motor parts out of storage, a '60 case, '59 jugs and heads, and just set them up for a look see....
Had a 4 sp tranny too....
A look from the other side....
More Later
